VCM for 4-Stroke Diesels

ABB
Valve Control Management
 
The VCM system varies valve timing and lift by interposing a high pressure oil chamber into the engine valve train. Under the designation VCM Valve Control Management, ABB Turbocharging and engine component specialist INA Schaeffler KG are developing an advanced variable valve train system. VCM offers engine builders a vital technology for attaining low NOx emissions combined with optimized fuel efficiency and increased power density on the four-stroke diesel and gas engines of the future. VCM is based on INA’s UniAir system for automotive engines. It allows variation of both valve timing and lift on four-stroke diesel and gas engines in the power range above 400 kW. A prototype of the new VCM system is currently undergoing an extensive test program. Following successful test bed trials, first results from “hot” on-engine trials confirm the system’s suitability for highly flexible valve timings on 4-stroke engines. VCM is an ideal complements ABB Turbocharging’s Power2 two stage turbocharging system as enabling technologies of Miller Cycles on four-stroke diesel and gas engines. On diesel engines, strong, variable Miller Cycles hold the prospect of attaining the 80% reductions in NOx emissions specified by IMO Tier III limits for Emission Control Areas using only primary, on-engine measures. VCM allows inlet valve timings to be varied at lower engine loads to avoid increased emissions of smoke and particulates and higher thermal loading, as well as improving engine response, idling and starting. VCM is also a versatile and valuable tool for closely adapting engine performance to the operating profile of a given engine application. Variation in valve timing and lift is achieved by interposing a high pressure oil chamber into the engine valve train between the valve and its mechanical actuation system. A solenoid valve varies the filling of the chamber with engine lube oil pressurized by a camshaft actuated pump. This enables both the timing of the opening and closing of the valve to be varied as well as the distance the valve opens (valve lift). The pump also feeds a brake unit above the valve to limit forces when the valve contacts its seat.
Specifications
Images
1000838
 

For Sale

2 x Sulzer 12ZAV40S Diesel Engine Power Plant

featureprod

ref#GS812 2 x Sulzer 12ZAV40S Diesel Engine Power Plant 1993 HFO Fuel 60HZ 7500KW @ 514RPM 11,000 Voltage

 

*SURPLUS* CAT 3512 B HD T1 PROPULSION ENGINES "A" Rated 1,675 HP@1600 RPM

SURPLUS INVENTORY, 0 HOURS w/ ABS & IMO1 GL Certifications. These Commercial Workboat “A” Rated High Displacement T1 Engines are avail due to a Project Cancellation.

 

* SURPLUS * CAT 3508 B T1 PROPULSION ENGINES “C” Rated 1,100 HP @ 1800 RPM

SURPLUS INVENTORY, 0 HOURS w/ ABS & IMO1 GL Certifications. These Commercial Workboat “C” Rated T1 Engines are avail due to a Project Cancellation. Multiple RH service side engines are available.

 

* SURPLUS * CAT 3516 C T2 PROPULSION ENGINES “B” Rated 2,100 HP @ 1600 RPM

featureprod

SURPLUS INVENTORY, 0 HOURS w/ ABS & IMO1 GL Certifications. These Commercial Workboat “B” Rated T2 Engines are avail due to a Project Cancellation. RH & LH service side engines are available.

 

Pair of 12V71 Detroit Propulsion Engines

featureprod

One pair of Detroit 12V71 /12VA088583 Model # 7122700 Spec 8327 Port and Starboard engines trans Twin Disc MG5090A(SOLD) Ratio 1.96 to

 

Services

hhhh

На нашем судне требуется замена пришедшего в негодность главного двигателя английского производства KELVIN Diesels model - TBSC8 535 bhp 399kWb at 1350 RPM.

 

Deutz

parts and complete engine

 

Mercruiser D254 service

I'm looking for a technician that can service the D254.

 

flooded engine

boat was flooded, engine need to be looked at at mwra marine annapolis

 

cablaggio motore

ricostruzione cablaggio danneggiato